Pay in installments of $5.89 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 27 - Sep 1
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
the tarp lays flat on the ground Ultralight Tarp FloorDescription This tub floor works well with our 1P Cirriform Tarp (shown) and most a frame style tarps. Made from 20D Silpoly with a silicone coating on the outside and a PU coating on the inside. It's not the lightest for a good reason. We've selected this fabric for our floors because it is durable enough to be used without a separate footprint in most cases, and because it is significantly more puncture resistant than other fabric we've tried. If
Description
This tub-floor works well with our 1P Cirriform Tarp (shown) and most a-frame style tarps.
Made from 20D Silpoly with a silicone coating on the outside and a PU coating on the inside. It's not the lightest for a good reason. We've selected this fabric for our floors because it is durable enough to be used without a separate footprint in most cases, and because it is significantly more puncture resistant than other fabric we've tried. If you prefer a lighter silpoly with sil/sil coating, please contact us.
Setup is easy - clip the top corners of the tub clip to your tarp's corners using the included rigging (see the "rigging tab"). For additional protection, connect the midpoints on each side to a point above and tension to cocoon yourself.
Made in the USA from imported materials.
Specifications
Dimensions:
- Width at head: 33" | 84cm
- Width at foot: 25.5" | 65cm
- Length: 86" | 218cm
- Tub depth: 5" | 13cm
Material:
20D Silpoly
- Coating: Silicone/PU
- Hydrostatic Head (20D): >4000mm
Itemized weight:
- Tub Floor: 4.4 oz | 125g
- 4 Mitten hooks: 0.14 oz | 4g
- 4 Tensionlocks: 0.16z | 4.5g
- 12ft of 1/16" Shockcord: 0.28 oz | 8g
- (a stuff sack is not included)
Rigging
The tub-floor is intended to be suspended from its top corners by clipping them out to your tarp's corners using the included rigging.
Overview
Included: Shock cord, tensionlocks, and mitten hooks
You'll attach rigging to the: top corners of the tub (4)
Cord length: For using the floor with a 1P Cirriform, cut the front cords (2) to about 36" and the rear cords to about 30". For other tarps, lay the floor under your pitched tarp. Then, measure the distance from the floor's corners to the tarp's associated corner. Cut the shock cord to about 70 - 90% of that length (the two front cords should be equal length, as should the two cords for the foot).
Install rigging at each corner
- Using a girth hitch, install a tensionlock on the upper tie-out loop at each of the tub's corners.
- Tie a mitten hook to the end of each cord. We like to use a clinch knot.
- Thread the untied end of the shockcord through the tensioner as shown (first through the middle opening from bottom to top, then through the remaining hole from top to bottom).
- Tie a loop in the untied end of the cord. We like like to use an overhand loop knot.
- Repeat at each corner
- Note: The images below show the 1P Bug Shelter, but the process is the same.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy